How Can You Get Your Well Water Tested?

Often county health departments will help you test for bacteria or nitrates.

If not, you can have your water tested by a state certified laboratory.

You can find one in your area by calling the Safe Drinking Water Hotline at 800-426-4791 or visiting www.epa.gov/safewater/labs.

How much is well water testing?

The cost of a well water inspection varies by location, but tends to range from $300 to $500. It includes: Collecting and analyzing water samples.

How do you test bacteria for well water?

Suggested clip · 40 seconds

How to Test Well Water for Bacteria – YouTube

YouTube

Start of suggested clip

End of suggested clip

What is the best well water test kit?

Best Water Test Kit Reviews – Top Picks

  • Bang-for-the-Buck’ Essential Indicators City Water Test.
  • Drinking Water Test Kit.
  • Health Metric Drinking Water Test Kit.
  • Watersafe WS425W Well Water Test Kit.
  • HoneForest Water Quality Tester.
  • Hach 2745250 Total Hardness Test Strips.
  • Baldwin Meadows Drinking Water Test Kit.

How long does it take to get well water test results?

Other contaminants should be tested for at least once every five to ten years. Q. How long will it take to get the results? Some laboratories may take as long as two weeks to return your results. For typical results, Clean Water Testing will usually return your results within three to five business days.

How often should you test your well water?

Private well water should be tested a minimum of once per year. Drinking water supplies obtained from shallow wells and surface water sources should be tested more frequently (i.e. seasonally), as they are more susceptible to contamination. It is important to test your drinking water at the tap and at the source.

How much does a well and septic inspection cost?

Foote says the cost for a well and septic inspection typically runs between $600-$700 for the inspection process and lab fees. The cost to pump a septic tank is typically $350.

Can you get cancer from well water?

People that consume high levels of heavy metals risk acute and chronic toxicity, liver, kidney, and intestinal damage, anemia, and cancer. Drinking water with radionuclides can cause toxic kidney effects and increase the risk of cancer. Fluoride can be present in many aquifers and can be found in private wells.

Can you shower in water with coliform?

Drinking water used for brushing teeth should be of safe water quality (e.g. boil water for one minute, bring water from a safe source, or buy bottled water). Showering with water that is bacterially unsafe (total coliform positive, E.coli negative) has a far lower risk of illness than drinking this water.

How do I get rid of coliform in my well water?

The well is shocked! Turn off the taps and leave the system alone for 12 hours so the chlorine has enough time to kill the bacteria. To remove the bleach, pump the well water out through a hose attached to a tap (inside or out, but away from the septic system) until you can’t smell the chlorine anymore.

Should you test your well water?

You should have your well tested once each year for total coliform bacteria, nitrates, total dissolved solids, and pH levels. If you suspect other contaminants, you should test for those as well. You should also have your well tested if: There are known problems with well water in your area.

Is well water hard or soft?

Water becomes hard when minerals like calcium and magnesium latch onto the oxygen and hydrogen molecules. Well water is not inherently hard, but it is more likely to be hard because the water is coming from the ground instead of dedicated reservoirs.

How do water test strips work?

Test strips – These are small, single-use strips that change color to indicate the concentration of a specific chemical. Depending on the particular test, the user “activates” the paper or plastic strip by dipping it into the water sample and swishing it around, or by holding the strip in a stream of water.

Testing Recommendations for Private Drinking Water Wells

ContaminantWhich wells or homes should be tested?
NitrateWells within ¼ mile of an agricultural field or animal feed lot
Well used by pregnant women and infants
Wells that have levels above 2 mg/L
ArsenicEvery well

14 more rows

How do you treat well water?

Shock chlorination is the process by which home water systems such as wells, springs, and cisterns are disinfected using household liquid bleach (or chlo- rine). Shock chlorination is the most widely recommended means of treating bacterial contamination in home water systems.

Does VA require a water test?

So if the property has a well, then a VA well water test is required. In order to determine the water is safe, VA uses the guidelines of the local health authority governing the area of the property. In the absence of a local governing health authority, the guidelines of the EPA determine if the water is potable.

How long can a well last?

With proper maintenance and care, the lifespan can be increased to fifteen years. After ten years, if your water well is not working correctly, it needs to be replaced. How long water well last depends on various factors that affect the water well pump such as: Water sediments.

What are the symptoms of contaminated well water?

yes, household well water that is contaminated likely holds coliform bacteria and E-coli.

Common infected well water symptoms include:

  1. flu-like symptoms.
  2. fever symptoms.
  3. abdominal cramps.
  4. diarrhea.
  5. nausea.
  6. fatigue.
  7. loss of energy.
  8. severe flu.

Can you get sick from drinking well water?

Well Water Contamination: Health Effects

There can be no physical impact, or drinking contaminated water can cause severe illness or in extreme cases even death. Some contaminants like lead and arsenic can accumulate in the body with no ill effects for sometimes years.